USAGE

The belt is intended for use during the horse's return to sport or other work.

Provides reinforcement during sudden jumps or other unexpected movements and shocks.

The anatomical shape of the belt provides comfort for the horse. The bandage is comfortable for the horse, soft and the materials used are fully breathable.

A hernia recovery or colic riding belt are allowed to be used at races.

INSTRUCTIONS FOR USE

• Place the protective band over the horse’s back before saddling up with the fasteners pointing in the direction of the horse’s head and both ends of the band hanging freely either side of the horse..
• Pull both ends of the band together under the horse’s belly and attach Velcro fasteners as required.
• Thread the anchoring straps underneath the girth and fasten as to position the protective band 5 to 10 cm (2 to 4 in) behind your boot’s position, depending on your needs and the length of spurs used.
• Attach the adjustable straps to breastplate rings at the front of the saddle.
• Recheck the protective band for correct fit and tension.

TAKING CARE OF THE PRODUCT

• The protective band is machine washable at 30C, ideally using a soap solution and gentle washing cycle.
• Use lower-speed spinning over a shorter time. Prolonged spinning at high RPM may cause irreversible damage to fibres.
• Do not use bleaching agents. It is also not recommended to use fabric conditioners as they can create a film on the yarn preventing direct contact between the product surface and skin.
• Wash with all fastenings done, including all Velcros, to prevent possible damage to the fabric.
• Do not leave to dry in direct sunlight or near a source of heat.
• Avoid contact with organic solvents, oils, fats and salves.
• Protect the product from damage by sharp items.

Recommendation:
When you are measuring on the border of sizes, it is always advisable to lean towards the smaller circumference.